At the bitumen production reactor, during the air acting, the mixture of the two Vacuum Bottom (VB) and Vacuum Silabes (VS) feedstock pressed under a special and temperature pressure between 200-300˚C of which the hydrogen atoms content in bitumen molecular oxidize to oxygen of air, and obtains with higher hydrocarbons polymerization reaction that has lower penetration and bigger softening points rather than the primary pure bitumen. This kind of bitumen has the softening point of 115 and permeability of 15.
Covering of the floor of water channels- the concrete surface cracks- to cover the cracks in the concrete surface- for other construction works- producing different types of moisture insulation
HEALTH & SAFETY
The MSDS for this product can be obtained on request.
BITUMEN R115 / 15
|Relative density at 25° C, g/ml||1.00-1.06||ASTM D70|
|Penetration @25° C,0.1 mm||10-20||ASTM D5|
|Softening point (Ring and Ball), °C||110-120||ASTM D36|
|Ductility @25 °C cm, min||1.5||ASTM D113|
|Loss on heating % by mass||0.2||ASTM D6|
|Flash point (Cleveland open Cup),||200||ASTM D92|
|Solubility in toluene % wt min||99||EN 12592:2000|